{"product_id":"p118-ultra-3l","title":"P118 Ultra 3L","description":"\u003cp\u003eMipa P 118 Ultra PE-Leichtspachtel is a low-viscosity, self-levelling 2K polyester lightweight body filler designed to smooth out dents and surface irregularities during car body repairs. It delivers a pore-free, ultra-smooth surface finish that allows technicians to bypass applying a separate fine putty stage. Despite its lightweight formulation, it resists sagging and offers rapid curing with high-abrasion sandability.\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 99.9413%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eAttribute \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eSpecification \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eColour \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eGreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eBinder Base \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eUnsaturated Polyester Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eHardener \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eMipa Hardener P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003ePot Life \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003e3-4 Minutes (With Mipa Hardener P At 20C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eSanding \/ Curing \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003e15-20 Min At 20C 5-10Min At 60C 4-5 Min Via IR Drying (Approx 80CM Distance, Max 80C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eVOC Content \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eMax 25g\/l (EU Limit 250 g\/l Cat. B\/b\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication \u0026amp; Processing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Preparation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThoroughly clean, dry, and degrease the surface with Mipa Silikonentferner prior to work.  \u003c\/p\u003e\n\u003cp\u003eSand the substrate slightly. Remove any uncured old paintwork or priming coats.  \u003c\/p\u003e\n\u003cp\u003eBare metal\/rust repair: De-rust defective spots down to bare metal and dry-sand using P 80 \/ P 150 paper.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncompatibility\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eDo not apply over thermoplastic paints or acid-curing wash primers (Reaktionsprimer).  \u003c\/p\u003e\n\u003cp\u003eNon-Ferrous Metals \u0026amp; Restorations: When applying over non-ferrous metals (aluminium, galvanised steel) or during vintage car restorations, apply a primer coat of Mipa EP-Primer-Surfacer first to ensure optimal adhesion and long-term corrosion protection.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMix 100 parts by weight of Mipa P 118 Ultra thoroughly with 2 parts by weight of Mipa Härter P.  \u003c\/p\u003e\n\u003cp\u003eDo not exceed 3% hardener. Over- or under-dosing hardener can lead to spotting\/bleed-through in the final paint finish.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eEnvironmental Conditions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProcess between +10 °C and up to 80% relative humidity with adequate air ventilation.  \u003c\/p\u003e\n\u003cp\u003eNote: Polyester body fillers stop curing completely at temperatures below +10 °C.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSanding\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eBody filler must only be dry sanded.  \u003cbr\u003eInitial dry sanding: P 150 \/ P 240 grit paper.  \u003cbr\u003eFinal dry sanding: P 240 \/ P 320 grit paper to a matt finish prior to applying surfacer\/primer coats.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIsolation\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eAlways isolate the cured filler with a Mipa 1K or 2K filler primer prior to topcoat application.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Mipa Paints Limited","offers":[{"title":"EACH","offer_id":62396501426563,"sku":"296030000","price":42.99,"currency_code":"GBP","in_stock":true},{"title":"BOX OF 4","offer_id":62396501393795,"sku":"296030000","price":171.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/9155\/0967\/files\/296030000-P118Ultra3l.png?v=1787048645","url":"https:\/\/nebulapaintproducts.uk\/products\/p118-ultra-3l","provider":"Nebula Paint Products Limited","version":"1.0","type":"link"}