{"product_id":"p19-e-styrene-free","title":"Mipa P 19 E Styrene-Free Lightweight Body Filler","description":"\u003cp\u003eMipa P 19 E Styrolfrei PE-Leichtspachtel is a high-quality, styrene-free 2-component polyester body filler formulated with renewable raw materials. Engineered for leveling depressions and surface unevenness in automotive repairs as well as vehicle and mechanical engineering, it offers high filling power, easy sandability, and an eco-friendly profile without compromising performance. The ready-to-use mixture contains 7% renewable raw materials when combined with Mipa Härter P.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 99.9413%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eAttribute\u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eSpecification \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eColour\u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eLight Brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eBinder Base \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eUnsaturated Polyester \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eHardener \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eMipa Hardener P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eMixing Ratio (By Weight)\u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003e100 : 2 (Body FIller : Mipa Hardener P)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003ePot Life \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003e4-6 Minutes (With Mipa Hardener P At 20C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eSanding \/ Curing Time \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003e20Min At 20C. 10Min At 60C 4-5 Min Via IR Dryng (Approx 80CM DIstance, Max 80C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2671%;\"\u003eVOC Content \u003c\/td\u003e\n\u003ctd style=\"width: 65.5771%;\"\u003eMax 25 g\/l (EU Limit 250 g\/l. Cat B\/b\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication \u0026amp; Processing Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Preparation: \u003c\/strong\u003eClean, dry, and thoroughly degrease the entire work surface with Mipa Silikonentferner prior to application.  \u003c\/p\u003e\n\u003cp\u003eSand the substrate slightly. Completely remove any uncured old paintwork or priming coats.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBare metal\/rust repair:\u003c\/strong\u003e De-rust defective spots down to bare metal and dry-sand using P 80 \/ P 150 paper.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncompatibility\u003c\/strong\u003e: Do not apply over thermoplastic finishes or acid-curing wash primers (Reaktionsprimer).  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Ferrous Metals \u0026amp; Restorations\u003c\/strong\u003e: When applying over non-ferrous metals (aluminium, galvanised steel) or during vintage car restorations, applying a primer coat of Mipa EP-Primer-Surfacer first is recommended to maximise adhesion and corrosion protection.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixing\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eMix 100 parts by weight of Mipa P 19 E thoroughly with 2 parts by weight of Mipa Härter P.  \u003c\/p\u003e\n\u003cp\u003eDo not exceed 3% hardener. Under- or over-dosing hardener can cause bleed-through or spotting in final topcoat paint layers.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvironmental Conditions:\u003c\/strong\u003e Process between +10 °C and up to 80% relative humidity with adequate supply and exhaust ventilation.  \u003c\/p\u003e\n\u003cp\u003eNote: Polyester body fillers stop curing at temperatures below +10 °C.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSanding\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cp\u003eBody filler must only be dry sanded.  \u003c\/p\u003e\n\u003cp\u003eInitial dry sanding: P 150 \/ P 240 grit paper.  \u003c\/p\u003e\n\u003cp\u003eFinal dry sanding: P 240 \/ P 360 grit paper to achieve a uniform matt finish prior to surfacer\/primer coats.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIsolation:\u003c\/strong\u003e Always isolate the cured filler with a Mipa 1K or 2K primer filler before applying topcoats.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Mipa Paints Limited","offers":[{"title":"EACH","offer_id":62396819243395,"sku":"296720000","price":24.99,"currency_code":"GBP","in_stock":true},{"title":"BOX OF 12","offer_id":62396819210627,"sku":"296720000","price":249.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/9155\/0967\/files\/296720000-P19EStyrene-Free1L.png?v=1787049744","url":"https:\/\/nebulapaintproducts.uk\/products\/p19-e-styrene-free","provider":"Nebula Paint Products Limited","version":"1.0","type":"link"}