If you're looking for a product range that delivers a professional-grade car clean every time, then look no further. The Mipa MP Car Clean System has you covered, from the initial pre-clean through to the final dry and interior detailing.
A truly comprehensive car detailing job requires focus on four key areas to ensure your vehicle is spotless and protected:
Wheels & Tyres
Bodywork & Paint
Glass & Visibility
Interior Plastics & Surfaces
The Ultimate 6-Step Guide to a Complete Car Clean
Your 6 Simple Steps to a Spotless Car:
- Deep Wheel Decontamination: This crucial first step involves breaking down and lifting corrosive ferrous brake dust and heavy road grime to protect your wheel finish from permanent damage.
- The Pre-Wash: A thorough preclean is essential to dislodge and flush away loose, abrasive surface dirt before contact washing begins, drastically minimizing the risk of swirl marks.
- Contact Wash & Surface Cleansing: Using a rich, lubricating lather, this process gently encapsulates and lifts embedded road film from the paintwork to achieve a deep, clean shine.
- Crystal Clear Clarity: Apply a quality cleaner to both exterior and interior glass surfaces to eliminate streaks, fingerprints, and traffic film, ensuring perfect, glare-free visibility.
- Final Drying & Polishing: The final step involves using a soft microfibre cloth to quickly and gently remove all residual water and product haze to reveal a flawless, spot-free finish across all surfaces.
- Interior Revitalisation & Protection: A dual-action spray is used to lift light soil from plastic and vinyl surfaces while simultaneously laying down a layer of UV inhibitors to prevent fading and cracking.
Step 1: Hit the Wheels First (Bye-Bye Brake Dust!)
We always start with the wheels because they hold the most dirt, grime, and brake dust. They need a deep clean before anything else. We recommend the MP Reiniger Wheel Pro Spray. This stuff is seriously powerful, yet it's acid-free, so it’s safe for your rims.
Apply a coating of the solution onto the cool wheel rims.
Rinse: Let it sit for just 1–3 minutes, then rinse it all off thoroughly.
Before: Brake Dust Build-Up. Wheels are the dirtiest part! The ferrous brake dust and grime shown here are corrosive. A dedicated pre-soak is essential to prevent damage. Time for MP Reiniger Wheel Pro Spray!
During: The Magic in Action! Watch the satisfying color change! MP Reiniger Wheel Pro Spray turns purple or red as it chemically dissolves corrosive brake dust. Let it dwell for 1–3 minutes no hard scrubbing required!
After: Spotless and Protected. A quick rinse leaves the wheel bright and completely clean! The corrosive grime is eliminated, protecting your finish long-term. Your wheels are now spotless and ready for any tire dressing!
Step 2: Pre-Clean the Body (Stop Scratches!)
Before you take a mitt to the paint, you need to loosen up all that stuck-on road grime and bug residue. This pre-clean is vital for preventing tiny scratches (swirl marks) during the main wash! The MP Power-Löser Insect & Dirt Remover is the perfect solution for this stage.
Apply a coating of the solution onto the cool wheel rims.
Rinse: Let it sit for just 1–3 minutes, then rinse it all off thoroughly.
Spray: Hit the contaminated areas of the car’s bodywork.
Wait: Let the solution sit and penetrate the dirt for 1–3 minutes.
Rinse: Rinse completely.
Before: The Accumulation of Road Grime. This dirt is abrasive and, if not pre-treated, can cause micro-scratches during the wash. Our MP Power-Löser Insect & Dirt Remover is formulated to tackle this stubborn layer safely.
During: MP Power-Löser Actively Penetrating Dirt. The product is applied and actively dissolving road film, oil, and insect remains. This crucial step lifts contaminants away, preventing physical abrasion later on.
After: Clean, Prepped Surface (Post-Rinse). The surface is visibly free of heavy grime. This contaminant-free canvas is perfectly primed for the gentle contact wash, significantly reducing the risk of inflicting swirl marks.
Step 3: The Main Wash (Hello, Shine & Protection!)
Time for the contact wash! For amazing lubrication and built-in protection, grab the MP Shampoo Diamond Gloss.
Mix it up: Measure out 50 ml (about 5 capfuls) of shampoo and mix it with 10L of water in your wash bucket.
Wash: Apply the soapy water using a clean wash mitt, always starting at the top of the car and working your way down.
Rinse: Rinse it completely with a soft stream of water until all the shampoo is gone.
During: Achieving Peak Lubricity. Using the MP Shampoo Diamond Gloss, the vehicle is covered in a thick, rich lather. This wash provides maximum lubrication to safely lift any remaining fine dirt. Remember to start from the top and work your way down!
After: Nano Protection Activated. Once rinsed, the paintwork is visibly clean and glossy. Thanks to the integrated nano technology in the MP Diamond Gloss, a protective, water-repellent layer is instantly formed, ensuring long-lasting shine and making future cleaning easier!
Step 4: Crystal Clear Glass
Clear windows are critical for safety, and nothing looks worse than streaky glass.
Nebula Paints recommends the MP Glassreiniger Crystal Clear Glass Cleaner for a perfect, streak-free finish.
Apply: Spray the cleaner directly onto the glass.
Wipe: Wait 1 minute, then wipe the glass using smooth, straight vertical strokes with a clean microfibre cloth.
Buff: Use a fresh, dry microfibre cloth to buff the glass dry using small circular motions.
During: Applying the Glass Cleaner. A light mist of MP Glassreiniger is applied. Focus on using a clean, dry microfibre cloth for the initial wipe—straight lines are key to avoiding streaks!
After: Perfect Clarity. The glass is now completely transparent and residue-free. This drastically improves visibility and gives your car a truly professional finish.
Step 5: The Streak-Free Drying Finish
This step is quick, but it is CRUCIAL! You must dry your car using a high-quality, absorbent microfibre drying towel. If you let the car air dry, you'll end up with ugly water spots and streaks on your paint and glass.
The Final Touch. Use a dedicated, absorbent drying towel to gently wick away all residual water. This prevents mineral deposits from etching into your paint, locking in the streak-free shine you just created!
Step 6: Detailing the Interior
You can't forget where you sit! Dust, grease, and fingerprints build up fast inside the car. For the interior, the MP Interior Spray Clean & Protect is perfect.
Spray: Spray the area you want to clean.
Wipe: After a short moment, wipe it using a clean microfibre cloth.
Finish: It dries completely residue-free, leaving a clean, protected, and non-greasy surface.
During: Wiping Down Surfaces. The citrus-smelling MP Interior Spray Clean & Protect is applied and wiped with a cloth, lifting dust, grease, and fingerprints effortlessly from your plastics and vinyl.
After: Clean and Protected Cabin. The interior is left feeling fresh, clean, and residue-free. A clean cabin makes every drive more enjoyable!
The Best Part... All of this is included in our MP Car Care Bundle with a Few Extras!
This Kit Includes:
- MP Shampoo Diamond-Gloss 500ml
- MP Wheel Cleaner 500ml
- MP Crystal Clear Glass Cleaner 500ml
- MP Interior Spray Clean & Protect 500ml
- MP Green Soft Microfibre Cloth X4
- MP Microfibre Cloth 40 x 40cm
- MP Sponge X2