Mipa 1K UV Filler (Spachtel) (500g)
Free Next Day Delivery on qualifying orders over £60 at checkout
In Stock
Why Choose Nebula Paints?
Mipa 1K-UV-filler is a 1-component, fast-curing UV fine putty designed for efficient, spot-repair filling of small damage. By curing under UV light in just 5 minutes without heat, it drastically reduces cycle times and thermal stress on heat-sensitive substrates.
| Attribute | Specification |
| Colour | Grey-Greenish Transparent |
| Binder Base | UV Curing Acrylic Resin |
| Max Dry | Film Thickness Max 1,500 µm (1.5 mm) |
| Pot Life | Unlimited (If Stored In a Lightproof Container) |
| UV Drying Time | Approx 5 Minutes (UV LED Lamp Or Hg Mercury Vapour Lamp) |
| VOC Content | Max 3 g/l (EU Limit 250g/l Cat B/b |
| Shelf Life | At Least 2 Years At 20C In Sealed Original Container |
Application:
Apply fine putty up to a maximum dry film thickness of 1,500 µm (1.5 mm).
No intermediate flash-off time is needed prior to UV irradiation.
UV Curing:
Lamp Distance: Position lamp 20–30 cm from the object.
Radiation Time: Irradiate for approximately 5 minutes.
Coverage: Overlap light passes if the area exceeds the lamp's light field.
Important: Direct sunlight drying is not permitted. Do not exceed 1,500 µm thickness to prevent curing failure.
Sanding:
Must be dry sanded only.
Initial dry sanding: P 150 / P 240 grit.
Final dry sanding: P 240 / P 360 grit to a uniform matt finish prior to primer-filler application
Isolation
Always isolate with a Mipa 1K or 2K filler primer prior to applying topcoats.
- Finish: Matt
- Direct-to-Plastic Adhesion: Exceptional adhesion to steel, aluminium, galvanised surfaces, GRP, wood, and directly to plastics including ABS, PVC, and PC.
- Exceptional Sanding & Resistance: Yields an extremely hard surface with mechanical strength and smooth sanding properties.
- Heat-Free Application: Protects plastic substrates from warping, deformation, and thermal damage caused by conventional heat curing.
- Ultra-Fast 5-Minute UV Cure: Cures rapidly under a UV LED or mercury-vapor lamp with no flash-off or cooling periods required.
- Instant 1K Ready-to-Use: No hardener mixing required, eliminating pot-life restrictions and product waste.
| Primer use |
•1K |
| Product formulation |
•Ready mixed |
| Intended application |
•Plastic |
| Paint finish |
•Matte |
| Suitable space |
•Outdoors |
| Suitable for material type |
•Plastic |
| Product category |
•Filler |
| Product type |
•Filler |
| Size |
•500g |
| 1K/2K |
•1K |
| Sector |
•Vehicle |
Choose options