Mipa E 80 Kaltzinn Epoxy Body Filler
Tax included. Shipping calculated at checkout
In Stock
Why Choose Nebula Paints?
Mipa E 80 (Kaltzinn) Cold Tin Epoxy Body Filler is a high-quality, two-component epoxy body filler formulated with lamellar pigmentation as a modern, safe alternative to traditional body soldering and lead loading. It delivers exceptional adhesion, outstanding bending resistance, and excellent chemical resistance against fuels, diesel, and diluted acids, making it ideal for structural automotive repairs, classic car restorations, and demanding metalwork.
| Attribute | Specification |
| Colour | Silver Grey Metallic Coarse |
| Binder Base | Epoxy Resin |
| Hardener | Mipa Hardener EPN |
| Mixing Ratio (Weight) | 2:1 (Mipa E 80 Kaltzinn : Mipa Hardener EPN) |
| Pot Life | 25 -35 Minutes (With Mipa Hardener EPN At 20C) |
| Sanding Time | 4-5 Hours (20C) / 20-30 Min (60C) / 10-15Min (IR At Max 80C) |
| VOC Content | Max 65 g/l (EU Limit g/l) |
Application & Processing Guidelines
Substrate Preparation:
Clean, dry, and degrease surfaces thoroughly using Mipa Silikonentferner before every step.
De-rust defective spots down to bare metal and dry sand using P 80/150 paper.
Remove any uncured old paintwork or priming coats.
Remove any uncured old paintwork or priming coats.
Incompatibility: Do not apply over thermoplastic or acid-based products (Reaktionsprimer).
Non-Ferrous Metals & Restorations: For aluminium, zinc-coated steel, or vintage car restorations, apply a priming coat of Mipa EP-Primer-Surfacer first to ensure maximum corrosion protection and optimal adhesion.
Mixing: Thoroughly mix Mipa E 80 Kaltzinn with Mipa Härter EPN at a 2 : 1 ratio by weight.
Application Conditions: Process from +10 °C and up to 80% relative humidity with adequate ventilation.
Sanding Guidelines:
Dry sand only
Initial dry sanding: P 150/240 grit paper.
Final dry sanding to a matt finish: P 240/360 grit paper prior to applying further body fillers or primers.
Choose options