PX9 + Hardener Univ 2 Comp Polyester Putty 1 Ltr
Tax included. Shipping calculated at checkout
In Stock
Why Choose Nebula Paints?
Mipa PX9 Multi-Purpose Polyester Body Filler is a high-quality two-component body filler engineered to smooth out dents and scratches on car panels, commercial vehicles, and machinery. Offering professional-grade adhesion on iron, steel, aluminium, GRP, zinced substrates, and wood, Mipa PX 9 combines high vertical stability with fine-grain filling to yield a smooth, sealed finish that won't feather-edge or detach during fine sanding.
| Attribute | Specification |
| Colour | Beige |
| Binder Base | Unsaturated Polyester Resin |
| VOC Content | Max 25 g/l (EU Limit: 250 g/l |
| Mixing Ratio (Weight) | 100:2 (Body Filler : Mipa Hardener P |
| Pot Life | 3-4 Minutes (With Mipa Hardener P At 20C |
| Sanding Time | 25 Minutes (20C / 7 Min (60C) / 4-5 Min (IR At Max 80C) |
Application & Processing Guidelines
Substrate Preparation: Surfaces must be clean, dry, free from grease, and slightly sanded. Remove uncured old paintwork or reactive/acid primers.
Ferrous Metal: De-rust defective areas to bare metal and dry sand with P 80/150. Degrease thoroughly with Mipa Silikonentferner.
Non-Ferrous/Vintage Restorations: For non-ferrous metals (aluminium, galvanized steel) or maximum rust protection, prime with Mipa EP-Primer-Surfacer prior to filling.
Mixing: Mix 100 parts by weight of Mipa PX 9 with 2 parts by weight of Mipa Härter P hardener (do not exceed 3%, as incorrect dosage can cause spotting in the final coat).
Application Conditions: Apply at temperatures above +10 °C and relative air humidity up to 80%.
Sanding & Finishing:
Dry sand only.
Initial dry sanding: P 150/240.]
Final dry sanding to a matt finish: P 240/360 before applying filler coats.
Choose options